Drinking Water/Seawater desalination

The Seawater desalination is a way to produce drinking water.Similar way possible to produce clean water from grey water.

Seawater heat vaporisation

Based on Drinking water distillation method.

Industrial way

Reverse osmosis

Around the world, household drinking water purification systems, including an RO step, are commonly used for improving water for drinking and cooking.

Such systems typically include these steps:

  • a sediment filter to trap particles, including rust and calcium carbonate
  • a second sediment filter with smaller pores
  • an activated carbon filter to trap organic chemicals and chlorine, which degrades certain types of thin-film composite membrane
  • an RO thin-film composite membrane
  • an ultraviolet lamp for sterilizing any microbes that survive RO
  • a second carbon filter to capture chemicals that survive RO

In some systems, the carbon prefilter is replaced by a cellulose triacetate (CTA) membrane. CTA is a paper by-product membrane bonded to a synthetic layer that allows contact with chlorine in the water. These require a small amount of chlorine in the water source to prevent bacteria from forming on it. The typical rejection rate for CTA membranes is 85–95%.

To work effectively, the water feeding to these units should be under pressure (typically 280 kPa (40 psi) or greater).[1]

Sources

  1. ↑ Knorr, Erik Voigt, Henry Jaeger, Dietrich (2012). Securing Safe Water Supplies : comparison of applicable technologies (Online-Ausg. ed.). Oxford: Academic Press. p. 33. ISBN 978-0124058866.
This article is issued from Wikibooks. The text is available under Creative Commons Attribution-Share Alike 4.0 unless otherwise noted. Additional terms may apply for the media files.